Logotipo Texsa, S.A.


TECSOUND FT is a soundproofing complex made up of the polymer-based, asphalt-free Tecsound synthetic membrane bonded to a porous felt mat, both formed in such a way as to offer excellent acoustic insulation in different building elements: walls, ceilings, roofs, etc.

Technical documentation

  • Logo Facebook
  • Logo Twitter
  • Logo Linkedin
  • Advantages
  • Application
  • Installation
  • Storage
  • Regulations

• High acoustic insulation, combined with soft, flexible elements (plasterboard, wood, conglomerate) or with brick or concrete walls
• Flexible.
• Easy to handle and adaptable to uneven surfaces.
• Easy to cut with a knife or scissors
• Cold- and heat-resistance.
• Excellent ageing resistance
• Rotproof.

Soundproofing of horizontal (ceilings) and vertical enclosures, where excellent soundproofing against airborne noise is required.
• Specially recommended in partition walls.
• Soundproofing against airborne noise in vertical surfaces.
• Soundproofing against airborne noise in ceilings.
• Reduction of impact noise level in all types of floors, applied underneath the flooring.
Its main applications cover new jobs and refurbishing work, industry, cinemas, theatres, sports complexes, discos, bars, restaurants, hotels, shopping centres, etc.

Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal, DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence problems of the TECSOUND FT o the rendering.
Installation of the membrane: prior to installing the membrane, contact adhesive must be applied to both substrate and soundproofing complex, and left to dry according to the instructions of the adhesive manufacturer before bonding the two surfaces. Pressure must be exerted on all the points to ensure correct adherence.
The product could be installed mechanically fastened. The number of fixings is 5 units/m2. Fasteners made of plastic or pvc must be used.
Laps: Overlap 5 cm. both vertically and horizontally. Care must be taken to always seal the laps correctly, as small openings can reduce the level of acoustic insulation required. In case of installing the product butt joint then Tecsound S Band 50 must be used to seal the joint.

Roll: 6 m. x 1,20 m
Pallet: 10 rolls (72 m²)
Roll: 1,20 m x 5,50 m
Pallet: 10 rolls (66 m²)
Roll: 1,20 m x 5,50 m
Pallet: 10 rolls (66 m²)

· In accordance with the following norms: CTE-DB-HR, EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 and EN ISO 717/1/2.
· Quality System in accordance with ISO:9001

Related Products




In cases where the user must provide data of a personal nature to TEXSA SYSTEMS SLU to use any of the Web services, the former will be expressly informed each time of the existence of an automated data base, the aim of same, those receiving the information and identity and address of the person responsible for data treatment, all with the aim of complying with that stipulated in Organic Law 15/1999 of 13th December, for the Protection of Data of a Personal Nature. To this effect, TEXSA SYSTEMS SLU shall reserve confidentiality of the data obtained and the users can exercise all rights to access, amendment, cancellation and any others referred to in aforementioned Organic Law 15/1999.

TEXSA SYSTEMS SLU has adopted all the necessary measures of a technical and organisational nature, to guarantee the security of the data of a personal nature, with the aim of preventing their alteration, loss, treatment or unauthorised access, in accordance with the requirements and conditions called for by Royal Decree 994/1999 of 11th June, in which the Regulation of safety measures of automated files containing data of a personal nature, is passed, notwithstanding the user's acceptance and knowledge that to date totally impregnable safety measures do not exist.

In case of doubt or the need to extend the information covering any of the above items, please do not hesitate to contact TEXSA SYSTEMS SLU.


C/Ferro Nº7,
Polígono Industrial Can Pelegrí,
08755, Barcelona - Spain
NIF B66067687

Tel. (+34) 93 635 14 00
Fax (+34) 93 635 14 80

Email:  lopd@texsa.com